| KPPWER/L | KPWER/L | PW02 | PPWR/L | PWBAZ | PWER/L | PW05 | PWGER/L | PWGR/L | PWR/L |
Roll Marking Tool PW05-R/L
The Roll Marking Tool PW05-R/L is mounted like a turning tool and is designed
to label turned parts directly on the CNC- or conventional lathes. The labeling
takes place in seconds while the spindle is running with 4 - 8 m/min or by
means of a C-Axis.
Marking range: starting from ø5mm - ø500mm
Available mounting shanks: 16 x 16mm, 20 x 20mm and 25 x 25mm
Tool video1
Tool video2
Marking Wheels
The marking wheels can be replaced easily and fast, therefore lengthy preparation times are avoided. Different workpiece diameters can be marked with the same marking wheel because only the text length is unreeled. A separate marking wheel for each workpiece diameter is not needed anymore.
Marking Wheel engraved from "solid"
Marking Wheels are engraved from "solid" and the text stands proud
from the base. The wheels can be supplied for any text, logos, trademarks and
type heights desired.
Marking Wheel engraved from "solid"
Marking Wheel engraved from "solid" for marking in grooves
Marking Wheel for exchangeable segments
With Marking Wheels for exchangeable segments, the text can be fast and flexibly
arranged in order to mark different workpieces. The text is arranged with
help of individual character or number segments. In
less than one minute, the marking wheel is replaced and ready again for the
next inscription. If desired a loader for the segments is available.
Corner Marking Wheel for exchangeable segments
