| KPPWER/L | KPWER/L | PW02 | PPWR/L | PWBAZ | PWER/L | PW05 | PWGER/L | PWGR/L | PWR/L |
Roll Marking Tool PWGER/L
The Roll Marking Tool PWGER/L is mounted like a turning tool and is designed
to label thin, thin-walled and unstable turned parts directly
on the CNC- or conventional lathes. The labeling takes place in seconds while
the spindle is running with 4 - 8 m/min
or by
means of a C-Axis.
Marking range: starting from ø20mm - ø50mm
Available mounting shanks: 25 x 25mm and 32 x 32mm
Marking Wheels
The marking wheels can be replaced easily and fast, therefore lengthy preparation times are avoided. Different workpiece diameters can be marked with the same marking wheel because only the text length is unreeled. A separate marking wheel for each workpiece diameter is not needed anymore.
Marking Wheel engraved from "solid"
Marking Whees are engraved from "solid" and the text stands proud
from the base. The wheels can be supplied for any text, logos, trademarks and
type heights desired.
Marking Wheel engraved from "solid"
Marking Wheel engraved from "solid" for marking in grooves
Marking Wheel for exchangeable segments
With Marking Wheels for exchangeable segments, the text can be fast and flexibly
arranged in order to mark different workpieces. The text is arranged with help
of individual character or number segments. In less than one minute, the marking
wheel is replaced and ready again for the next inscription. If desired a loader
for the segments is available.
Corner Marking Wheel for exchangeable segments
